The ClearStream Iron-Rust-Odor filter has several mediums that oxidize the iron and odor so they can be filtered out as the water passes through the filter.
AUTOMATIC IRON REMOVAL
- Iron and rust removal
- Odor removal … including sulfide odors caused by iron bacteria
- Sediment removal … common in well water
- Sparkling clean water
- High flow rates
- Irrigation Stain Control applications
Iron staining and “sulfur/rotten egg” smell are two of the most common problems people complain about with well water. All of these problems can be eliminated with the ClearStream Iron-Rust-Odor filter.
The performance of our filters is based on water quality and gallons per minute flow rate. There are several sizes available . . .contact us for our custom sizing model. The control system has extremely large internal waterways for high flow and very low pressure loss. The ClearStream Iron-Rust-Odor Filter can also be used for outside irrigation stain control . . again No chemicals!
High technology . . . only fresh water for automatic regeneration with no chemicals or clean up, and no safety issues. No chemicals or minerals are added to the filtered water.
The ClearStream Iron-Rust-Odor Filter has several mediums that oxidize the iron and odor so they can be filtered out as the water passes through the filter.
The filters are available in several configurations – single tank, twin and multiple depending on the flow rate requirement. These systems include top quality polyethylene insulting jackets to prevent tank sweating and the typical growth of mold because of excessive condensation moisture. The electronic timer on the control system is meter controlled as well as time accuated to determine regeneration frequency and time.